How to Replace Door Handles
The door handles that you have in your home are an important part of the design. A new handle can elevate your home's decor and bring your decor up to date.
As upvc door handle www.repairmywindowsanddoors.co.uk , your knobs for your doors can begin to feel stiff, or break. These are indicators that it's time to replace them. This guide will help choose the correct door handle replacement for your home.
Door Knobs
Door handles can enhance the appearance of your home, while making it easier for people to open and close doors. They are available in a wide range of finishes, colors and types to match your decor. If yours have started to show signs or need an upgrade You can replace them in a few easy steps.
You'll need to find the spindle, or shaft through which the knob is attached to the door. Some knobs have a small opening that can be used with a screwdriver to remove the set screws that hold the handle in place. Some have a slot or hole in which can be used with the flathead screwdriver on a spring-activated nut, known as a detent. When you press the pin and the latch mechanism opens, it releases and allows you to pull or push the knob.
After you have gained access to the spindle or shaft, take the knob off of the door and replace it with the new one. Be sure to align it properly and then verify that the latch functions properly before tightening your new set screws.
After replacing the knob, put the rod for latching over the door's hole and then lock it using the rod mechanism on the second knob. Ensure that the holes are aligned, then tighten the screws for the latch plate.
Some people opt for the smooth or brushed finish for their door hardware to create an elegant, modern look that is a perfect match for other furniture in their homes. Others prefer a more rustic look which is great for rustic-styled rooms. If you have family members who are unable to move You might want to consider choosing the rim lock or lever-style door knobs, which require less pressure to operate.
Other aspects are being considered more and more for the design of door handles. Infection control and accessibility have been major considerations in the creation of new designs for handles. For example, some can be operated using the arm of a person.
Latch
The latch that keeps your door handle open will wear out due to age and use. Changing out the old latch to fit an entirely new handle can be an easy DIY task and can make a big difference in how your door opens and closes.
Depending on the kind of knob you are using the latch could be a part of the knob itself or it might be an independent piece that is attached to the door. In either case, you will follow the same steps for removing and replacing. It's simple to take off the old latch, especially when you have an entry handle that has a "magic" button. This little pressure-slot, located on the side knob is what you need to press in order to remove the latch of the handle.
If your handle doesn't have this button, you'll need to remove the cover plates that are placed over the latch plate. These are usually circular or rectangular and can be removed with the help of a screwdriver. Some have a small slot inside that you can insert your screwdriver, whereas others simply snap off.
Next, you will want to remove the two machine screws that secure the latch and inner plate to the door handle. These are the screws that are shorter with a sharp point and you'll need to keep these in a safe location to use them again in the next steps. After the screws are removed, you can take the latch plate and the mechanism from the hole and set it aside.
You can now begin installing the new latch. Place the inside of the latch into the hole in the door, and secure it using the hardware supplied. Make sure that the square pin on the interior of the latch is facing the latching mechanism of the handle and aligns with the screw holes on the other sides of the handle. Then attach the latch's exterior plate using the screws supplied.
Strike Plate
One of the most common reasons for replacing the door handle is that it is loose or isn't locking properly. This is usually due to misaligned components in the latching mechanism, such as a strike plate that's too short or moved up or down on the doorjamb with time. This project allows you to replace your old strikeplate with a longer one, which will offer greater security for your door and keep it shut.
To determine if the issue is due to the strike plate, apply lipstick or similar marking material to the latch bolt. Close the door and try to latch it. If the mark is below your strike plate hole, it means that the plate is too small and the door won't latch. If the mark is above or below the strikeplate hole, the strikeplate has likely been moved up or downward on the doorjamb.
It is possible to put the new strikeplate in the one you have already installed by using the screws supplied with it, depending on the door. You may need to drill holes first, and then chisel the wood to ensure a secure fit. If this is the case, be careful not to chisel too much or you may cause damage to the integrity of your doorjamb.
You could also try installing a new box strike plate that will give the lock a more secure grip on the door and requires more force to open it. Typically it will require two longer screws that secure the strike plate to the frame of the door. It is necessary remove the old strike plate before drilling and chiseling the wood to create space for the new one.
This rare strike plate is made from solid brass and has an extremely thick. It's made to be used on antique rim locks. This kit includes both wood screws and machine screws, so you can pick the right hardware to suit your needs. Be aware that the wood screws have a pointy edge, whereas the machine screws are more blunt.